hit counter script

How To Charge The Battery - NEC MH240 User Manual

Wireless ip telephone
Hide thumbs Also See for MH240:
Table of Contents

Advertisement

o HOW TO CHARGE THE
BATTERY
Be sure to charge the battery before using the
phone for the first time. Use one of the
following:
Cradle
AC Adapter (direct connection)
By using the Cradle:
The phone can be charged by using the cradle.
You can also charge the battery by inserting the
battery pack alone in the slot on the cradle. This
is useful when you have a spare battery.
(1) Insert the AC adapter plug (mini USB) into
the USB connector in the back of the cradle.
(2) Plug in the AC adapter into an appropriate
AC outlet.
(3) Place the phone and/or the spare battery
pack as shown below. When placing a
battery pack into the slot, insert it so that the
label faces downward.
AC Adapter
USB connector
AC outlet
AC adapter plug
Cradle (Battery Charger)
Face the label of the battery pack
Note:
downward when inserting the battery
pack.
Info LED
Indicate charge status
LED
Indicate charge status
Spare Battery (optional)
10
(4) The LED on the cradle lights red, indicating
the battery is being charged. When the
phone battery is not being charged the Info
LED turns off.
(5) The LED on the cradle lights green when the
spare battery is fully charged. After this,
charging to the phone battery will start and
the Info LED lights red.
(6) The Info LED lights green when the phone
battery is fully charged.
An empty battery pack can be fully
TIP
charged in about 4 hours.
If any abnormality is found in the
TIP
battery, the LED on the cradle lights
off. In this case, please contact your
network administrator.
In the case you place the phone on
TIP
the cradle and insert the spare
battery in the slot at the same time,
the spare battery will be charged first.
Please insert the spare battery in the
TIP
slot on the cradle or remove it as
following figure.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents