Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
NOTE: Applicable only for computers that are shipped with optical drive.
1
Align the tabs on the optical-drive bezel with the slots on the optical drive and
snap the optical-drive bezel into place.
2
Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
3
Replace the two screws (M2x3) that secure the optical-drive bracket to the
optical drive.
4
Slide the optical-drive assembly into the optical-drive bay.
5
Align the screw hole on the optical-drive bracket with the screw hole on the base
cover.
6
Replace the screw (M2x2) that secures the optical-drive assembly to the base
cover.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before
21