Replacing The Heat Sink; Procedure; Post-Requisites - Dell Inspiron 5570 Service Manual
Inspiron 15 5000 series
Hide thumbs
Also See for Inspiron 5570:
- Service manual (77 pages) ,
- Setup and specifications (25 pages) ,
- Connection manual (11 pages)
Table of Contents
Advertisement
Replacing the heat sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Incorrect alignment of the heat sink can damage the system
board and processor.
NOTE: The original thermal grease can be reused if the original system
board and heat sink are reinstalled together. If either the system board or
the heat sink is replaced, use the thermal pad provided in the kit to ensure
that thermal conductivity is achieved.
Procedure
1
Place the heat sink on the system board and align the screw holes on the heat
sink with the screw holes on the system board.
2
Tighten the captive screws in the reverse order (4->3->2->1) to secure the heat
sink to the system board.
3
Replace the three (M2x3) screws that secure the heat sink to the system board.
Post-requisites
1
Replace the fan.
2
Replace the
base
3
Replace the
optical drive
70
computer. After working inside your computer, follow
After working inside your
cover.
(optional).
computer. For more safety best
www.dell.com/
Before
Hide quick links:
Advertisement
Table of Contents
