Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
optical drive
2
Remove the
base
3
Remove the
wireless
Procedure
1
Remove the three screws (M2.5x5) that secure the right hinge to the system
board and palm rest assembly.
2
Lift the right hinge.
3
Disconnect the power-adapter port cable from the system board.
4
Note the power-adapter port cable routing and remove it from the routing guides
on the palm rest and keyboard assembly.
5
Remove the screw (M2x2) that secures the power-adapter port to the palm rest
and keyboard assembly.
computer. After working inside your computer, follow
After working inside your
(optional).
cover.
card.
computer. For more safety best
www.dell.com/
Before
71