Table of Contents
Advertisement
About this task
Steps
1. Align the tabs on the battery with the slots on the palm rest assembly.
NOTE:
When installing the battery into the system, insert the tab at the bottom left corner of the battery into the hook
on the bottom side of the palm rest.
2. Replace the three (M2x3) screws that secure the battery to the palmrest.
3. Reconnect the battery cable to the connector on the system board.
NOTE:
When installing the battery into the system, insert the tab at the bottom left corner of the battery into the hook
on the bottom side of the palm rest.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
Disassembly and reassembly
27
Advertisement
Table of Contents
