Table of Contents
Advertisement
Steps
1. Align and place the system board on the palmrest.
2. Peel back the Mylar tape from over the screw hole.
3. Replace the two (M2x4) screws that secures the system board to the palmrest.
4. Connect the following cables to the system board:
a. Speaker cable
b. Keyboard FFC
c. Keyboard backlight FFC
d. Touchpad FFC
e. Hard drive FFC
f. IO board FFC
g. Power adapter port cable
h. Fingerprint reader FFC
i.
Power button FFC from the system board
Next steps
1. Install the
display
assembly.
2. Install the heatsink.
3. Install the
system
fan.
4. Install the
memory
5. Install the SSD.
6. Install the WLAN.
7. Install the battery.
8. Install the
base
cover.
9. Install the
SD
card.
10. Follow the procedure in
76
Disassembly and reassembly
after working inside your
computer.
Advertisement
Table of Contents
