Table of Contents
Advertisement
About this task
Steps
1. Place the solid-state drive into the thermal plate and install the single (M2x2) screw.
2. Slide and insert the tab of the solid-state drive into the solid-state drive slot.
3. Replace the single (M2x2.2) screw and tighten the single captive screw to secures the thermal plate to the palmrest.
Next steps
1. Connect the
battery
cable.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Removing the M.2 2280 Solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly
33
Advertisement
Table of Contents
