Table of Contents
Advertisement
Solid-state drive
Removing the M.2 2230 Solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
About this task
Steps
1. Remove the single (M2x2.2) screw and loosen the single captive screw, securing the SSD thermal plate to the palmrest, to
lift it out of the system.
2. Turn the thermal plate over and remove the single (M2x2) screw securing the M.2 2230 SSD to the thermal plate.
3. Lift the solid-state drive off the thermal plate.
Installing the M.2 2230 Solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
32
Disassembly and reassembly
before working inside your
cable.
computer.
Advertisement
Table of Contents
