Table of Contents
Advertisement
About this task
Steps
1. Slide and insert the Solid-state drive into the M.2 port on the system board.
2. Place the thermal bracket on the solid-state drive, replace the single (M2x2.2) screw and tighten the captive screw to
secure the thermal plate to the palmrest.
Next steps
1. Connect the
battery
cable.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Hard drive
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
35
Advertisement
Table of Contents
