Advertisement
Quick Links
1. Disassembly Procedures:
S1
Turn off power..
Unplug external cables(power cable and video
S2
cable) from the monitor.
Remove stand from the product.(Press the stand
S3
release button, lift the stand up and away from the
monitor)
Use a Philips-head screwdriver to remove 4pcs
S4
screws for unlocking mechanisms. Remove DP cap.
(No.1~4 screw size=M4x11; Torque=11
1kgfxcm)
±
2
3
1
4
Wedge your fingers between rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S5
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the
joystick key cable from the connector of the main
S6
board, and then remove the rear cover and put it
aside for later disassembling.
Use a Philips-head screwdriver to remove 3pcs screw
for unlocking the joystick board, and then tear off all
S7
the tapes on the back of the cable and release the
joystick cable from the rear cover.
(No.1~3 screw size=M2x3.3, Torque=1
DELL P2424HEB
1
2
3
0.2kgfxcm)
±
1
2
3
1
2
3
1
Advertisement
Related Manuals for Dell P2424HEB
Summary of Contents for Dell P2424HEB
- Page 1 DELL P2424HEB 1. Disassembly Procedures: Wedge your fingers between rear cover and the middle bezel on the corners of the top side of the Turn off power.. monitor to release the rear cover, then use one hand to press the middle bezel, the other hand to pull up carefully the rear cover in order of arrow preference for unlocking mechanisms of rear cover.
- Page 2 DELL P2424HEB Disconnect the speaker cable away from the board, then release the speakers from the probers of the middle frame. Disconnect the panel lamp cable away from the connectors of the main board and panel. Tear off 2pcs aluminum foil and 4pcs acetate tape for releasing the cables, then release the speaker’s...
- Page 3 DELL P2424HEB Disconnect the LVDS cable away from the connector Lift up the middle bezel away from the pane module, of the panel module, then lift up and take away the then put it on a cushion foam for later disassembling.
- Page 4 DELL P2424HEB Turn over the bracket and remove the power board and interface board from the bracket chassis module carefully, and then disconnect all of the cables. Remove the Mylar tape from the hooks of the bracket chassis. Use a Philips-head screwdriver to remove 7pcs screws for interface board and power board.
- Page 5 DELL P2424HEB S23-4 Take out bulk cap. pin solder with soldering iron and Remove electrolyte capacitors (red mark) from absorber. printed circuit boards. S23-1 Cut the glue between bulk cap. and PCB with a knife. S23-5 Lift the bulk cap. up and away from the PCB.
- Page 6 DELL P2424HEB 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...