Advertisement
Disconnect the LVDS cable away from the connector
S14
of the panel module, then lift up and
bracket chassis and put it on a protective cushion.
Release the assembled camera unit from the
S15
probers of the middle frame and put it aside for later
disassembling.
Tear off 2pcs aluminum foil to release the Mic boards
Use a Philips-head screwdriver to remove 13pcs
S16
screws for unlocking the middle frame with the panel.
(No.1~11 screw size=M3x4,Torque=3
No.12~13 screw size=M2x3.3,Torque=1
6
2
10
4
11
12
take away the
0.5kgfxcm;
±
0.2kgfxcm)
±
1
3
7
8
5
9
13
Lift up the middle bezel away from the pane module,
S17
then put it on a cushion foam for later disassembling.
Use a Philips-head screwdriver to remove 4pcs
screws for unlocking the left and right Mic boards
S18
with the middle frame, then release the two Mic
boards away from the middle frame.
(No.1~4 screw size=M2x3.3,Torque=1
2
Release the touch key cable away from the panel,
S19
then disassemble the front bezel with the panel, then
tear off the mylar tape and release the touch board.
DELL P2424HEB
0.2kgfxcm)
±
1
3
4
3
Advertisement
