Dell 3100cn Color Laser Printer User Manual page 22
User's guide
Hide thumbs
Also See for 3100cn Color Laser Printer:
- Setup manual (2 pages) ,
- Owner's manual (90 pages)
Table of Contents
Advertisement
5. Reattach the control board cover to the printer.
Installing a Multi Protocol Card
A multi protocol card allows you to use the following network protocols.
Network
Supported OSes
protocol
IPP
Windows Me/2000/XP/Server 2003
SMB
Windows 95/98/Me/NT 4.0/2000/XP/Server
2003
NetWare
NetWare3.12/3.2/4.1/4.11/4.2/5/6/6.5*
(IPX/SPX)
AppleTalk
Mac OS 9/Mac OS X
* Supports only Support Pack 1.1 or later.
To Install the Multi Protocol Card
1. Make sure that the printer is turned off.
2. Remove the control board cover on the left side of the printer by pulling the notch.
3. Hold the multi protocol card so its connector is toward the printer, and push the connector into the slot on the control board.
4. Tighten the two screws supplied with the multi protocol card on the back side of the printer.
- Quick Links:
- Printer Settings
Hide quick links:
Advertisement
Chapters
Table of Contents
