Table of Contents
Advertisement
About this task
Steps
1. Place the heatsink on the system board and align the captive screws on the heatsink with the screw holes on the system
board.
2. Tiighten the four captive screws and install the three (M2x4) screws to secure the heatsink to the system board.
Next steps
1. Reconnect the
battery
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
5. Remove the SSD.
cable.
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly
45
Advertisement
Table of Contents
